This directory contains firmware binaries for uploading to a specific
wireless router / wireless access point. These are the variants:

openwrt*freifunk-de:   With OLSR/Freifunk Web UI, German Language
openwrt*freifunk-en:   With OLSR/Freifunk Web UI, English Language
openwrt*freifunk-fr:   With OLSR/Freifunk Web UI, French Language
openwrt*freifunk-es:   With OLSR/Freifunk Web UI, Spanish Language
openwrt*freifunk-0xff: With OLSR/Freifunk Web UI, Funkfeuer.at UI Variant (de)
openwrt*freifunk-psf:  With OLSR/Freifunk Web UI, Paris Sans Fil UI Variant (fr)
openwrt*freifunk-wlon: With OLSR/Freifunk Web UI, Wireless London UI Variant (en)
openwrt*minimal:       Stable OpenWRT with G-v2.2/GS-v1.1, No OLSR/Web UI

Please note that other directories exist:

../g/       Linksys WRT54G-v1.x, WRT54G-v2.0, WRT54G-v2.2
../gs/      Linksys WRT54GS-v1.0, WRT54GS-v1.1
../allnet/  Allnet ALL0277
../se505/   Siemens SE505
../trx/     Linksys WAP54G-v2.0 (4 Mb and 2 Mb versions)
../kit/     BIN/TRX generation kits

The TRX files can be used to upgrade via Freifunk Web-UI also. Due to an
update/bugfix for the MTD kernel code (Flash Memory Driver), this firmware
runs only on devices with Intel or AMD flash chips (Common Flash Interface).
This includes the mentioned Linksys and Allnet devices.

Hint: The SST (Standard Vendor Command Set) flash driver originally included
with OpenWRT-stable is not compiled in. If unsure, open your BCM_4207-based 
device first and verify the flash memory type.

This software is GPL. It is provided as-is and comes without any warranty.
Flashing a firmware not approved by the OEM will void your warranty too.
Further details can be found on http://ff-firmware.sourceforge.net/