This directory contains firmware binaries for uploading to a specific
wireless router / wireless access point. These are the variants:

openwrt*freifunk-de:   With OLSR/Freifunk Web UI, German Language
openwrt*freifunk-en:   With OLSR/Freifunk Web UI, English Language
openwrt*freifunk-fr:   With OLSR/Freifunk Web UI, French Language
openwrt*freifunk-es:   With OLSR/Freifunk Web UI, Spanish Language

Additional UI Varants are available as TRX and as KIT only:

freifunk-openwrt-kit-*-0xff.tgz:  Funkfeuer.at UI Variant (de, Vienna)
freifunk-openwrt-kit-*-hsh.tgz:   Wlanhsh UI Variant (de, Berlin)
freifunk-openwrt-kit-*-psf.tgz:   Paris Sans Fil UI Variant (fr, Paris)
freifunk-openwrt-kit-*-ninux.tgz: Rome Wireless UI Variant (it, Rome)
freifunk-openwrt-kit-*-wlon.tgz:  Wireless London UI Variant (en, London)
freifunk-openwrt-kit-*-wse.tgz:   Wlanwse UI Variant (de, Berlin)

Please note that other directories exist:

../_g/      Linksys WRT54G-v1.x, v2.0, v2.2, v3.0, v3.1, v4.0
../_gs/     Linksys WRT54GS-v1.0, WRT54GS-v1.1
../_gs40/   Linksys WRT54GS-v4.0 (WRT54GS-v3.0 unverified)
../_g3g/    Linksys WRT54G3G (A WRT54G with UMTS card)
../_allnet/ Allnet ALL0277 (tested: all0277 without ADSL)
../_moto/   Motorola WR850G (tested: wr850g v1.0, minor issues)
../_se505/  Siemens SE505 (v1.0, v2.0)
../_trx/    Linksys WAP54G-v1.1, v2.0; Asus WL500, WL500-Deluxe
../_kit/    BIN/TRX Linux generation kits

All BIN/TRX files can be used to upgrade via Freifunk Web-UI. You may
flash freifunk and change to your UI variant then with a *.trx file.

If you run Linux, it is easy to generate your own BIN/TRX files, e.g.
to make a BIN file for another UI variant. Unpack the corresponding
*.tgz, change to the subdir and enter "./gen-openwrt" for help. For
expample: type "./gen-openwrt gs40 > code.bin" for a WRT54GS-v4.0. 

Note: The SST (Standard Vendor Command Set) flash driver is not tested.
AFAIK this flash chip is used only in some Motorola boxes. If unsure, 
open your BCM_4207-based device first and verify the flash memory type.

This software is GPL. It is provided as-is and comes without any warranty.
Flashing a firmware not approved by the OEM will void your warranty too.
Further details can be found on http://ff-firmware.sourceforge.net/